NetXpert XG

User-friendly operation

Continuity test results of all 8 wires and the shielding are displayed in wire map format in full color, while showing cable faults such as opens, shorts, miswires, and split pairs in a clear and easy to understand way. NetXpert determines the cable length and the distance to faults performing full TDR (Time Domain Reflectometer) measurement in combination with a capacitance measurement, for increased accuracy.

Getting results faster

An autotest can be initiated either from the main unit or from the Active Remote, saving time spent for walking between outlets and reducing the overall working time.When troubleshooting, all cable tests can be performed individually, to minimize fault-finding time.

Description

The new NetXpert XG verifies, if cabling channels support maximum transmission rates of up to 10Gb/s, irrespective of the category of cables, patch panels, or outlets installed. NetXpert XG provides a precise statement by automatically performing three individual tests which are combined into an overall test result.

New standards defining data rates up to 10Gb/s are a big challenge for the qualifiers of the latest generation. Particularly cabling for wireless access points has to support the ever increasing data rates. In order to verify if the cabling installed is able to support the increased data rates, operators need to perform adequate testing before commissioning the network, to avoid any unpleasant surprises. NetXpert XG enables you to meet the new challenges now!

Technical features at a glance

  • Tests data cabling for IEEE 802.3 compliance at data rates
    of up to 10 Gb/s (BERT)
  • Determines signal-to-noise ratio (SNR)
  • Measures delay skew
  • Combined length measurement performing TDR and capacitance measurements for highly accurate test results and easier troubleshooting even of shorts
  • Full-color wire map shows opens, shorts, miswires, and split pairs in a clear and easy to understand way
  • Saves test results and generates standards-based measurement reports providing „Pass/Fail“

Network and diagnosis

  • Supports IPv4 and IPv6
  • Discover your network and see the connected network devices
  • Identifies defective PoE switches with a PoE load test
  • DHCP test
  • Ping lists can be defined and saved for later use
  • LLDP/CDP detection and analysis
  • Identifies VLANs present in your network
  • Data transfer from the tester to the PC using USB stick

Reviews

There are no reviews yet.

Add a review
wordpress blog stats