Festo

CPX Analogue Module - 2 outputs, 24 V DC

Part number CPX-2AA-U-I

Overview

Analogue module CPX-2AA-U-I Analogue module CPX-2AA-U-I Series: Individual component for electrical terminal CPX; Output ducts: 2 output channels; Input channels: None

Technical data

Dimensions (W x L x H) (incl. interlinking block and connection technology), 50 x 107 x 50 mm
Product weight 49 g
Ambient temperature -5 – 50°C
Storage temperature -20 – 70°C
Degree of protection Dependent on the manifold block
Corrosion resistance class CRC 1 - Low corrosion stress, (when installed)
Max. cable length 30 m, Shielded
LABS (PWIS) conformity VDMA24364-B2-L
Material housing PA-reinforced, PC
LED display 1 Group diagnostics
Diagnosis Wire break per channel, Limit value violation per channel, Short circuit of output signal per channel, Short circuit of actuator supply, Parameterisation error, Undervoltage of outputs
Number of outputs 2
Parameterisation Data format, Fail-safe per channel, Forcing per channel, Limit monitoring per channel, Idle mode per channel, Measured value smoothing, Signal range per channel, Behaviour after short circuit, Wire break monitoring per channel
Internal cycle time 4 ms
Operational voltage range DC 18 – 30 V
Nominal operating voltage DC 24 V
Intern power consumption nominal operating voltage Typically 100 mA
Data format 12 bits + prefix, Scalable to 15 bits
Repetition accuracy 0.05% at 25ºC
Basic error limit at 25 °C ±0.5%
Operating error limit related to the ambient temperature range ±0.6%
Sensor type 0 - 10 V, 0 - 20 mA, 4 - 20 mA
Isolation channel - channel no
Isolation channel - internal bus Yes, without using the internal sensor supply
Fuse protection (short circuit) Internal electronic fuse

Similar products