Festo
CPX Input/output Module - 2 inputs, 2 outputs
Part number CPX-2ZE2DA
Overview
Input/output module CPX-2ZE2DA Input/output module CPX-2ZE2DA Series: Individual component for electrical terminal CPX; Output ducts: 2 output channels; Input channels: 2 input channels; Switching input/output: Counter module
Technical data
| Dimensions (W x L x H) | (incl. interlinking block and connection technology), 50 x 107 x 50 mm |
|---|---|
| Grid dimension | 50 mm |
| Product weight | 130 g |
| Ambient temperature | -5 – 50°C |
| Storage temperature | -20 – 70°C |
| Degree of protection | IP65, IP67 |
| Corrosion resistance class CRC | 1 - Low corrosion stress, (when installed) |
| Max. cable length | 30 m |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Approval | UL - Recognized (OL) |
| Note on materials | RoHS-compliant |
| Material housing | Polymer |
| LED display | 1 Group diagnostics, 10 Channel status, 2 Module diagnostics, 2 channel diagnostics |
| Diagnosis | Operating-mode-dependent diagnostics |
| Number of outputs | 2 |
| Parameterisation | Switch-on/off delay, Frequency output, Speed measurement, Pulse output, Pulse train, Rotational speed measurement, Frequency measurement, Cycle duration measurement, Motor operating mode, Determination of position, Pulse-width modulation, One-off counting, Continuous counting, Periodic counting |
| Operational voltage range DC | 18 – 30 V |
| Nominal operating voltage DC | 24 V |
| Intern power consumption nominal operating voltage | Typically 35 mA |
| Number of inputs | 2 |
| Characteristic for inputs | To IEC 1131-2, type 02 |
| Switching level | Signal 0: <= 5 V, Signal 1: >= 11 V |
| Switching logic for inputs | PNP (positive switching) |
| Input debounce time | 0.1 µs (0.2 µs, 0.4 µs, 0.8 µs, 1 µs, 2 µs, 4 µs, 8 µs, 10 µs, 50 µs, 100 µs, 500 µs, 1 ms, 3 ms, 10 ms, 20 ms parameterisable) |
| Max. residual current of inputs per module | 2 A |
| Characteristic for outputs | IEC1131-T2 |
| Switching logic for outputs | NPN (negative switching), PNP (positive switching), Push-pull driver |
| Max. residual current outputs per module | 10 A |
| Max. power supply per channel | 5 A adjustable (20 W lamp load) |
| Isolation channel - channel | no |
| Isolation channel - internal bus | Outputs - yes, when using an intermediate air supply |
| Fuse protection (short circuit) | Internal electronic fuse per channel |
Similar products
Box Remote I/O Module B32-EC-11-26
CPX-AP 4-port IO-Link master 2 models
CPX-AP-I 4DI/4DO module 2 models
CPX-AP-I bus interface 4 models
CPX-AP-I digital input module 6 models
CPX-AP-I digital output module 2 models
