Festo
CPX-AP IO-Link Master Module - 4-Ports
Part number CPX-AP-I-4IOL-M12
Overview
IO-Link master; Series: Individual devices for automation system CPX-AP-I; Output ducts: None; Input channels: 4 input channels; Function module: IO-Link master module
Technical data
| Protocol | IO-Link® |
|---|---|
| Dimensions (W x L x H) | 30 x 170 x 35 mm |
| Type of mounting | On H-rail via accessories, With through-hole |
| Product weight | 126 g |
| Ambient temperature | -20 – 60°C |
| Storage temperature | -40 – 70°C |
| Relative air humidity | 5 - 95%, Non-condensing |
| Degree of protection | IP65, IP67 |
| Note on degree of protection | Unused connections sealed |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| Max. cable length | 20 m with IO-Link® operation, 50 m system communication |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
| CE mark (see declaration of conformity) | To EU EMC Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| KC mark | KC-EMV |
| Approval | RCM trademark, c UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA, PC, Die-cast zinc, nickel-plated |
| Material o-ring | FPM |
| Diagnostics via LED | Diagnostics per channel, Diagnostics per module, Load power supply, Status per channel, Status per module |
| Diagnostics per internal communication | IO-Link® event, Short circuit/overload in sensor supply, Electronics/sensors overvoltage, Load overvoltage, Electronics/sensors undervoltage, Load undervoltage |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded according to EN 61076-2-114 |
| Communication interface, number of pins/cores | 4 |
| Communication interface, protocol | AP |
| Communication interface, screened | yes |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, connection type | Plugs |
| power supply, connection system | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note voltage drop |
| Nominal operating voltage DC of load | 24 V |
| Permissible voltage fluctuation of load | ± 25 % |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25% |
| Max. power supply | 2 x 4 A (external fuse required) |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 55 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 5 mA |
| Power failure bridging | 10 ms |
| Reverse polarity protection | yes |
| Electrical connection for IO-Link, connection type | 4 x socket |
| Electrical connection for IO-Link, connection technology | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection for IO-Link, number of pins/wires | 5 |
| IO-Link, communication | C/Q green LED |
| IO-Link, Number of ports | 4 |
| IO-Link, Port class | B |
| IO-Link, Protocol version | Master V 1.1 |
| IO-Link, communication mode | DI, COM1. COM2. COM3., Configurable via software |
| IO-Link, Process data length OUT | Can be parameterised, 8-128 bytes |
| IO-Link, Process data length IN | Can be parameterised, 12-132 bytes |
| IO-Link, Min. cycle time | Dependent on minimum supported cycle time of the connected IO-Link® device |
Often bought with
NEBC Connecting Cable - M8 D-coded 4-Pin to M8 D-coded 4-Pin, 5 m NEBC-D8G4-ES-5-N-S-D8G4-ET
NEBL Connecting Cable - M8 4-Pin to Open End, 5 m NEBL-M8G4-E-5-N-LE4
NEBU Connecting Cable - M12 5-Pin to M12 5-Pin, 5 m NEBU-M12G5-E-5-Q8N-M12G5
