Festo
DSMI-40-270-A-B — Semi-rotary drive
DSMI-40-270-A-B Semi-rotary drive
Part number DSMI-40-270-A-B · Order no. 561691
Overview
Semi-rotary drive DSMI-40-270-A-B. Piston diameter: 40 mm; Swivel angle: 0…272°; Min. mass moment of inertia, horizontal: 0.006; Max. mass moment of inertia horizontal: 0.12
Technical data
| Rotation angle adjustment range | 0 – 270° |
|---|---|
| Stroke reduction at end positions | 5 ° |
| Smallest positioning stroke | 5° during positioning, 15° with Soft Stop |
| Piston diameter | 40 mm |
| Swivel angle | 0 – 272° |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Positioning installation position | optional |
| Soft Stop installation position | Horizontal |
| Functional principle of measuring system | Analogue |
| Design | Drive shaft, running in ball bearings, Vane |
| Position detection | Via proximity switch, Via integrated angular displacement encoder |
| Operating pressure | 0.2 – 1 MPa |
| Operating pressure positioning/Soft Stop | 4 – 8 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 2 Hz |
| Max. travel speed | 2000 |
| Min. travel speed | 50 |
| Typical positioning time short stroke, horizontal | 0.25/0.25 s |
| Typical positioning time long stroke, horizontal | 0.30/0.55 s |
| Connection resistance | 5 kΩ |
| Recommended wiper current | 1 |
| Mode of operation | Double-acting |
| Max. operating voltage DC | 42 V |
| Max. wiper current, short-time | 10000 mA |
| Max. current consumption | 4 mA |
| Nominal operating voltage DC | 10 V |
| Connection resistance tolerance | 20% |
| Permissible voltage fluctuations | <1% |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Degree of protection | IP65, To IEC 60529 |
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |
| Ambient temperature | -10 – 60°C |
| Impact energy in end positions | 0.1 Nm |
| Max. axial force | 120 N |
| Max. mass moment of inertia horizontal | 0.12 |
| Max. mass moment of inertia vertical | 0.12 |
| Max. radial force | 350 N |
| Min. mass moment of inertia, horizontal | 0.006 |
| Min. mass moment of inertia, vertical | 0.006 |
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 20 Nm |
| Product weight | 3950 g |
| Angle resolution | 0.1° |
| Output signal | Analogue |
| Non-dependent linearity | 0.0025 |
| Repetition accuracy positioning | +/-0.3 deg |
| Repetition accuracy Soft Stop end position | < 0.2 deg |
| Repetition accuracy Soft Stop intermediate position | +/-2 deg |
| Electrical connection encoder | 4-pin |
| Cable length | 30 m |
| Type of mounting | Via female thread |
| Pneumatic connection | G1/8 |
| Material housing, displacement encoder | Wrought aluminium alloy, Anodised |
| Material stop lever | Wrought aluminium alloy, Anodised |
| Material drive shaft | Nickel-plated steel |
| Material fixed stop | Steel |
| Material housing | Wrought aluminium alloy, Anodised |
| Material measuring system coupling | TPE-U(PU) |
| Material woodruff key | Steel |
| Material swivel vane | Reinforced PET |
| Material connector housing | PA-reinforced |
| Material cylinder barrel | Wrought aluminium alloy |
