Festo
SPAU Pressure Sensor - 0 bar - 10 bar, NC/NO Switchable
Part number SPAU-P10R-MS4-F-L-PNLK-PNVBA-M8D
Overview
Pressure sensor; Start value for pressure measuring range: 0; End value for pressure measuring range: 10; Switching element function: N/C or N/O contact, switchable; Pneumatic connection: Flange; Electrical connection 1, connector system: M8x1, A-coded, to EN 61076-2-104
Technical data
| Symbol | 995410 |
|---|---|
| Approval | RCM trademark, c UL us listed (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| KC mark | KC-EMV |
| Note on materials | RoHS-compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa / 0 bar / 0 psi |
| End value for pressure measuring range | 1 MPa / 10 bar / 145 psi |
| Overload pressure | 1.5 MPa / 15 bar / 217.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 – 50°C |
| Ambient temperature | 0 – 50°C |
| Resolution ADC | 12 |
| Accuracy in ± % FS | 1.5 |
| Repetition accuracy in ± %FS | 0.3 |
| Temperature coefficient in ± %FS/K | 0.05 |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Freely programmable |
| Switching element function | N/C or N/O contact, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 - 10 V, 4 - 20 mA, 1 - 5 V |
| Rise time | 3 ms |
| Max. load resistance current output | 500 Ω |
| Min. load resistance voltage output | 10 kΩ |
| Short circuit current rating | yes |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, Profile | Smart sensor profile |
| IO-Link, Function classes | Binary data channel (BDC), Process data variable (PDV), Identification, Diagnostics, Teach channel |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, Port class | A |
| IO-Link, Process data length OUT | 0 bytes |
| IO-Link, Process data length IN | 2 bytes |
| IO-Link, Process data content IN | 14 bit PDV (pressure measurement value), 2 bit BDC (pressure monitoring) |
| IO-Link, Min. cycle time | 3 ms |
| IO-Link, Data storage required | 500 kB |
| Operational voltage range DC | 20 – 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plugs |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock, Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 991171 |
| Type of mounting | On service unit |
| Mounting position | optional |
| Pneumatic connection | Flange |
| Product weight | 80 g |
| Material in contact with the medium | FPM, PA-reinforced |
| Display type | Illuminated LCD |
| Displayable units | MPa, bar, inH2O, inHg, kPa, kgf/cm², mmHg, psi |
| Setting options | IO-Link®, Teach-in, Via display and keys |
| Protection against tampering | IO-Link, PIN code |
| Setting range threshold value | 0 – 100% |
| Setting range hysteresis | 0 – 90% |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
Often bought with
NEBA Connecting Cable - M8 4-Pin to Open End, 2.5 m NEBA-M8G4-U-2.5-N-LE4
