Festo

CLR-32-10-L-P-A-B-K11-R8 — Linear/swivel clamp

CLR-32-10-L-P-A-B-K11-R8 Linear/swivel clamp

Part number CLR-32-10-L-P-A-B-K11-R8 · Order no. 535488

Overview

Linear/swivel clamp CLR-32-10-L-P-A-B-K11-R8. Piston diameter: 32 mm; Theoretical clamping force at 0.6 MPa (6 bar, 87 psi): 362 N; Clamping stroke: 10 mm; Swivel angle: 90 deg +/-2 deg

Technical data

Total stroke 28 mm
Piston diameter 32 mm
Piston rod thread M8
Swivel angle 90 deg +/-2 deg
Clamping stroke 10 mm
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Design Piston, Piston rod, Cylinder barrel
Position detection Via proximity switch
Swivel direction Left
Variants Weld spatter protection, Dust protection
Operating pressure 2 – 10 bar
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Ambient temperature -10 – 80°C
Effective clamping force at 0.2 MPa (2 bar, 29 psi) 111 N
Effective clamping force at 0.4 MPa (4 bar, 58 psi) 216 N
Effective clamping force at 0.6 MPa (6 bar, 87 psi) 313 N
Max. tightening torque Clamping finger screw 24 Nm
Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) 362 N
Product weight 700 g
Type of mounting Either:, With through-hole, Via female thread, With accessories
Pneumatic connection G1/8
Material wiper PPS
Material collar screws Steel, Galvanised
Material cover Wrought aluminium alloy, Coated
Material seals NBR, TPE-U(PU)
Material housing Wrought aluminium alloy, Smooth anodised
Material piston rod Coated, High-alloy stainless steel
Material cylinder barrel Wrought aluminium alloy, Smooth anodised

Often bought with

Similar products