Festo
CPX-CTEL-4-M12-5POL — Electrical interface
CPX-CTEL-4-M12-5POL Electrical interface
Part number CPX-CTEL-4-M12-5POL · Order no. 1577012
Overview
Electrical interface CPX-CTEL-4-M12-5POL. Series: Individual component for electrical terminal CPX; Bus protocol/activation: I-Port interface
Technical data
| Protocol | I-Port |
|---|---|
| Dimensions (W x L x H) | (incl. interlinking block), 50 x 107 x 55 mm |
| Product weight | 110 g |
| Ambient temperature | -5 – 50°C |
| Storage temperature | -20 – 70°C |
| Degree of protection | IP65, IP67 |
| Corrosion resistance class CRC | 1 - Low corrosion stress, (when installed) |
| Max. cable length | 20 m |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Note on materials | RoHS-compliant |
| Material housing | PA-reinforced, PC |
| LED display | - I-Port status/diagnostics, Module status, Load supply status, System supply status |
| Diagnosis | Communication fault, Module short circuit, Module-orientated diagnostics, Undervoltage |
| Operator controls | DIL switch |
| Max. address volume, inputs | 32 |
| Max. address volume, outputs | 32 |
| Parameterisation | Diagnostic behaviour, Fail-safe per channel, Forcing per channel, Idle mode per channel, Module parameters, Tool-change mode |
| Internal cycle time | 1 ms per 1 byte of user data |
| Additional functions | Tool-change mode |
| Electrical connection | 4x socket, 5-pin, A-coded, M12 |
| Operational voltage range DC | 18 – 30 V |
| Nominal operating voltage DC | 24 V |
| Intern power consumption nominal operating voltage | Typ. 65 mA |
| Power failure bridging | 10 ms |
| Max. total output current per channel | 4 x 1.6 A |
| Max. power supply per channel | 4 x 1.6 A |
| Isolation channel - channel | no |
| Isolation channel - internal bus | Yes, with intermediate air supply |
| Number of device interfaces | 4 |
