Festo

DFM-6-5-P-A-GF — Guided drive

DFM-6-5-P-A-GF Guided drive

Part number DFM-6-5-P-A-GF · Order no. 4149944

Overview

Guided drive DFM-6-5-P-A-GF. Piston diameter: 6 mm; Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 17 N; Stroke: 5 mm; Cushioning: Elastic cushioning rings/plates at both ends; Position detection: Via proximity switch

Technical data

Distance from centre of gravity of load to yoke plate xs 10 mm
Stroke 5 mm
Piston diameter 6 mm
Operating mode, drive unit Yoke
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Guide Plain-bearing guide
Design Guidance
Position detection Via proximity switch
Operating pressure 0.2 – 0.8 MPa / 2 – 8 bar
Max. speed 1.3 m/s
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 - Low corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14 Class 6 according to ISO 14644-1
Ambient temperature -10 – 60°C
Impact energy in end positions 0.012 Nm
Max. permissible torque load Mx as a function of stroke 0.011 Nm
Max. effective load dependent upon stroke at defined distance xs 1.1 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 13 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 17 N
Torsional backlash 0.1°
Moving mass 8 g
Product weight 28 g
Pneumatic connection M3
Note on materials RoHS-compliant
Material cover High-alloy stainless steel
Material seals NBR
Material dynamic seals HNBR
Material end plate Anodised wrought aluminium alloy
Material guide rod High-alloy stainless steel
Material housing Anodised wrought aluminium alloy
Material piston rod High-alloy stainless steel

Often bought with

Similar products