Festo

DFSP-16-10-S-PA — Stopper cylinder

DFSP-16-10-S-PA Stopper cylinder

Part number DFSP-16-10-S-PA · Order no. 576056

Overview

Stopper cylinder DFSP-16-10-S-PA. Piston diameter: 16 mm; Impact force: 880 N; Stroke: 10 mm; Position detection: Via proximity switch

Technical data

Stroke 10 mm
Piston diameter 16 mm
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Mode of operation Double-acting, Pulling
Design Piston, Piston rod, Profile barrel
Position detection Via proximity switch
Protection against torque/guide Round piston rod
Operating pressure 0.28 – 1 MPa / 2.8 – 10 bar
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14 Class 5 according to ISO 14644-1
Ambient temperature -10 – 80°C
Impact force 880 N
Permissible lateral force during switching operation 147 N
Max. cycle frequency 5 Hz
Type of mounting Either:, With through-hole, Via female thread, With accessories
Pneumatic connection M5
Note on materials RoHS-compliant
Material collar screws High-alloy stainless steel
Material cover Wrought aluminium alloy, Anodised
Material seals TPE-U(PU)
Material piston rod High-alloy stainless steel
Material roll Galvanised steel
Material cylinder barrel Wrought aluminium alloy, Smooth anodised

Often bought with

Similar products