Festo
DHPC-6-A-NC-S-1 — DHPC Parallel Gripper - 2 mm stroke per jaw
DHPC Parallel Gripper - 2 mm stroke per jaw, pneumatic, NC
Part number DHPC-6-A-NC-S-1 · Order no. 8116748
Overview
Parallel gripper DHPC-6-A-NC-S-1. Stroke per gripper jaws: 2 mm; Position detection: Via proximity switch; Max. force on gripper jaw Fz static: 22 N; Max. mass per external gripper finger: 6 g
Technical data
| Size | 6 |
|---|---|
| Stroke per gripper jaws | 2 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0° |
| Max. gripper jaw backlash Sz | 0 mm |
| Rotationally symmetrical | ≤ 0.2 mm |
| Repetition accuracy, gripper | ≤ 0.02 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Single-acting, Closed |
| Gripper function | Parallel |
| Gripper force back-up | During closing |
| Design | Lever, Side mounting method for gripper fingers, Force pilot operated motion sequence |
| Guide | Ball guide |
| Position detection | Via proximity switch |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. |
| Operating pressure | 0.35 MPa ... 0.8 MPa / 3.5 bar ... 8 bar / 50.75 psi ... 116 psi |
| Max. operating frequency of gripper | 3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 16 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 16 ms |
| Max. mass per external gripper finger | 6 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 °C ... 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 10.4 N |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 5.2 N |
| Mass moment of inertia | 0.012 kgcm² |
| Max. force on gripper jaw Fz static | 22 N |
| Max. torque at gripper Mx static | 0.11 Nm |
| Max. torque at gripper My static | 0.24 Nm |
| Max. torque at gripper Mz static | 0.11 Nm |
| Product weight | 27 g |
| Type of mounting | Either:, Direct mounting via through-hole, Direct mounting via thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Material housing | Anodised aluminium |
| Material gripper jaws | High-alloy stainless steel |
Often bought with
NEBA Connecting Cable - 1 m, M8x1 to M8x1 NEBA-M8G3-U-1-N-M8G3
NEBA Connecting Cable - 2.5 m, M8x1 to M8x1 NEBA-M8G3-U-2.5-N-M8G3
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-0,3-L-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-0,3Q-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-2,5Q-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10G-PS-24V-E-2,5Q-OE
Similar products
DHPC Parallel gripper DHPC 10 24 models
DHPC Parallel gripper DHPC 16 24 models
DHPC Parallel gripper DHPC 20 24 models
DHPC Parallel gripper DHPC 25 24 models
DHPC Parallel gripper DHPC 32 12 models
DHPC Parallel gripper DHPC 40 12 models
