Festo

DHPL-10-20-P-A — DHPL Parallel Gripper - 10 mm stroke per jaw

DHPL Parallel Gripper - 10 mm stroke per jaw, pneumatic

Part number DHPL-10-20-P-A · Order no. 8112216

Overview

Parallel gripper DHPL-10-20-P-A. Design: Rack and pinion; Stroke per gripper jaws: 10 mm; Position detection: Via proximity switch; Pneumatic connection: M5; Operating pressure: 0.25…0.8 MPa

Technical data

Size 10
Total stroke 20 mm
Stroke per gripper jaws 10 mm
Max. replacement accuracy 0.2 mm
Max. angular gripper jaw backlash ax, ay 0.22°
Max. gripper jaw backlash Sz 0.064 mm
Rotationally symmetrical 0.2 mm
Repetition accuracy, gripper 0.03 mm
Number of gripper jaws 2
Drive system Pneumatic
Mounting position optional
Mode of operation Double-acting
Cushioning Elastic cushioning rings/plates at both ends
Gripper function Parallel
Gripper force back-up None
Design Rack and pinion
Guide Plain-bearing guide
Position detection Via proximity switch
Operating pressure 0.25 – 0.8 MPa / 2.5 – 8 bar / 36.25 – 116 psi
Max. operating frequency of gripper 2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 41 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 70 ms
Max. mass per external gripper finger 54 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 - Low corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Degree of protection IP54
Ambient temperature -10 – 60°C
Total gripping force, opening, 0.6MPa (6bar, 87 psi) 60 N
Total gripping force, closing, 0.6MPa (6bar, 87 psi) 38 N
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) 30 N
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) 19 N
Mass moment of inertia 1.6 – 2.2 kg cm²
Max. force on gripper jaw Fz static 40 N
Max. torque at gripper Mx static 0.5 Nm
Max. torque at gripper My static 0.5 Nm
Max. torque at gripper Mz static 0.5 Nm
Maintenance interval Life-time lubrication
Product weight 251 g
Type of mounting Either:, With through-hole
Pneumatic connection M5
Note on materials RoHS-compliant
Material cover cap Wrought aluminium alloy, anodised
Material cover Anodised wrought aluminium alloy
Material end plate Anodised wrought aluminium alloy
Material housing Anodised wrought aluminium alloy
Material gripper jaws Anodised wrought aluminium alloy
Material piston seal TPE-U(PU)
Material piston rod High-alloy stainless steel
Material o-ring NBR
Material screws Galvanised steel
Gear rack material High-alloy stainless steel
Gear wheel material Sintered bronze

Often bought with

Similar products