Festo

DHPS-6-A — DHPS Parallel Gripper - 2 mm stroke per jaw

DHPS Parallel Gripper - 2 mm stroke per jaw, pneumatic

Part number DHPS-6-A · Order no. 1254039

Overview

Parallel gripper DHPS-6-A. Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi): 13.5 N; Stroke per gripper jaws: 2 mm; Position detection: Via Hall sensor; Gripper force back-up: None

Technical data

Size 6
Stroke per gripper jaws 2 mm
Max. replacement accuracy 0.2 mm
Max. angular gripper jaw backlash ax, ay 1°
Max. gripper jaw backlash Sz 0.02 mm
Rotationally symmetrical 0.2 mm
Repetition accuracy, gripper 0.02 mm
Number of gripper jaws 2
Drive system Pneumatic
Mounting position optional
Mode of operation Double-acting
Gripper function Parallel
Gripper force back-up None
Design Lever, Force pilot operated motion sequence
Guide Plain-bearing guide
Position detection Via Hall sensor
Operating pressure 0.2 – 0.8 MPa / 2 – 8 bar / 29 – 116 psi
Max. operating frequency of gripper 4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 8 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 17 ms
Max. mass per external gripper finger 10 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 - Low corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils Metals with more than 1% of copper as an alloy component are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils
Ambient temperature 5 – 60°C
Total gripping force, opening, 0.6MPa (6bar, 87 psi) 30 N
Total gripping force, closing, 0.6MPa (6bar, 87 psi) 25 N
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) 15 N
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) 13.5 N
Mass moment of inertia 0.008 kg cm²
Max. force on gripper jaw Fz static 10 N
Max. torque at gripper Mx static 0.5 Nm
Max. torque at gripper My static 0.5 Nm
Max. torque at gripper Mz static 0.5 Nm
Lubrication interval for guide components 10
Product weight 19 g
Type of mounting Either:, Via female thread and centring sleeve, Via through-hole and centring sleeve
Pneumatic connection M3
Note on materials RoHS-compliant
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy stainless steel

Similar products