Festo
DHRC-6-A — DHRC Radial Gripper - 180° opening angle
DHRC Radial Gripper - 180° opening angle, pneumatic
Part number DHRC-6-A · Order no. 8125285
Overview
Radial gripper DHRC-6-A. Size: 6; Operating pressure: 0.25…0.8; Mode of operation: Double-acting; Max. torque at gripper My static: 0.3 Nm; Pneumatic connection: M3
Technical data
| Size | 6 |
|---|---|
| Max. replacement accuracy | ≤ 0.2 mm |
| Max. opening angle | 180° |
| Repetition accuracy, gripper | ≤ 0.1 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Radial |
| Gripper force back-up | None |
| Design | Force pilot operated motion sequence |
| Position detection | Via proximity switch |
| Operating pressure | 0.25 MPa ... 0.8 MPa / 2.5 bar ... 8 bar / 36.25 psi ... 116 psi |
| Max. operating frequency of gripper | ≤ 3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 10 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 19 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 °C ... 60 °C |
| Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening | 6.7 Ncm |
| Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) | 4.8 Ncm |
| Mass moment of inertia | 0.01 kgcm² |
| Max. force on gripper jaw Fz static | 12 N |
| Max. torque at gripper Mx static | 0.3 Nm |
| Max. torque at gripper My static | 0.3 Nm |
| Max. torque at gripper Mz static | 0.3 Nm |
| Product weight | 24.5 g |
| Type of mounting | Either:, Direct mounting via through-hole, Direct mounting via thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Material cover cap | Wrought aluminium alloy, anodised |
| Material housing | Anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy steel |
Often bought with
NEBA Connecting Cable - 1 m, M8x1 to M8x1 NEBA-M8G3-U-1-N-M8G3
NEBA Connecting Cable - 2.5 m, M8x1 to M8x1 NEBA-M8G3-U-2.5-N-M8G3
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-0,3Q-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-0,3-L-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-2,5Q-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10G-PS-24V-E-0,3Q-M8D
Similar products
DHRS Radial gripper DHRS 9 models
HGRT Radial gripper HGRT 12 models
