Festo
DRRD-8-180-FH-PA — Semi-rotary drive
DRRD-8-180-FH-PA Semi-rotary drive
Part number DRRD-8-180-FH-PA · Order no. 2223060
Overview
Semi-rotary drive DRRD-8-180-FH-PA. Size: 8; Swivel angle: 180°; Permissible mass moment of inertia: 0.0015; Theoretical torque at 0.6 MPa (6 bar, 87 psi): 0.2 Nm; Position detection: Via proximity switch
Technical data
| Size | 8 |
|---|---|
| Cushioning angle | 38° |
| Setting range of swivel angle for each end position | +10/-100 deg |
| Swivel angle | 180° |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | optional |
| Design | Rack and pinion |
| Position detection | Via proximity switch |
| Operating pressure | 0.3 – 0.8 MPa / 3 – 8 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Ambient temperature | -10 – 60°C |
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 0.2 Nm |
| Permissible mass moment of inertia | 0.0015 |
| Product weight | 155 g |
| Type of mounting | Either:, With through-hole, Via female thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS-compliant |
| Material drive shaft | High-alloy stainless steel |
| Material seals | NBR, TPE-U(PU) |
| Material housing | Wrought aluminium alloy, Smooth anodised |
Often bought with
QSM-M3-3 Push-in fitting QSM-M3-3
QSM-M3-3-I Push-in fitting QSM-M3-3-I
QSML-M3-3 Push-in L-fitting QSML-M3-3
GRLA-M3-QS-3 One-way flow control valve GRLA-M3-QS-3
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-0,3-L-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10M-NS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-2,5-L-OE
Similar products
DRRS Semi-rotary drive DRRS 4 models
