Festo
DRVS-6-90-P-EX4 — Semi-rotary drive
DRVS-6-90-P-EX4 Semi-rotary drive
Part number DRVS-6-90-P-EX4 · Order no. 2536483
Overview
Semi-rotary drive DRVS-6-90-P-EX4. Size: 6; Theoretical torque at 0.6 MPa (6 bar, 87 psi): 0.15 Nm; Swivel angle: 0…90°; Pneumatic connection: M3; Permissible mass moment of inertia: 0.00065
Technical data
| Size | 6 |
|---|---|
| Cushioning angle | 0.5° |
| Swivel angle | 0 – 90° |
| Permissible stop radius | 10 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | optional |
| Mode of operation | Double-acting |
| Design | Vane |
| Position detection | Via proximity switch |
| Variants | Spigot shaft |
| Operating pressure | 0.35 – 0.8 MPa / 3.5 – 8 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 3 Hz |
| Repetition accuracy | 1° |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db X |
| Explosion ambient temperature | 0 °C <= Ta <= +60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Ambient temperature | 0 – 60°C |
| Max. stop force | 15 N |
| Max. axial force | 10 N |
| Max. radial force | 15 N |
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 0.15 Nm |
| Permissible mass moment of inertia | 0.00065 |
| Product weight | 38 g |
| Type of mounting | Via female thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS-compliant |
| Material drive shaft | High-alloy stainless steel |
| Material seals | TPE-U(PU) |
| Material housing | Anodised wrought aluminium alloy |
Similar products
DSM Semi-rotary drive DSM 10 22 models
DSM Semi-rotary drive DSM 12 17 models
DSM Semi-rotary drive DSM 16 17 models
DSM Semi-rotary drive DSM 25 17 models
DSM Semi-rotary drive DSM 32 17 models
DSM Semi-rotary drive DSM 40 17 models
