Festo
DSBG-32-50-PPSA-N3 — ISO cylinder
DSBG-32-50-PPSA-N3 ISO cylinder
Part number DSBG-32-50-PPSA-N3 · Order no. 1645462
Overview
ISO cylinder DSBG-32-50-PPSA-N3. Mode of operation: Double-acting; Piston diameter: 32 mm; Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 415…483 N; Stroke: 50 mm; Cushioning: Self-adjusting pneumatic end-position cushioning
Technical data
| Stroke | 50 mm |
|---|---|
| Piston diameter | 32 mm |
| Piston rod thread | M10x1.25 |
| Cushioning | Self-adjusting pneumatic end-position cushioning |
| Mounting position | optional |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread |
| Design | Piston, Piston rod, Tie rod, Cylinder barrel |
| Position detection | Via proximity switch |
| Variants | Piston rod at one end |
| Operating pressure | 0.06 – 1.2 MPa / 0.6 – 12 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Ambient temperature | -20 – 80°C |
| Impact energy in end positions | 0.4 J |
| Cushioning length | 17 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415 – 483 N |
| Moving mass | 155 g |
| Moving mass for 0 mm stroke | 110 g |
| Additional moving mass per 10 mm stroke | 9 g |
| Product weight | 590 g |
| Basic weight for 0 mm stroke | 465 g |
| Additional weight per 10 mm stroke | 25 g |
| Type of mounting | Either:, Via female thread, With accessories |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Material cover | Coated die-cast aluminium |
| Material piston seal | TPE-U(PU) |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy steel |
| Material piston rod wiper | TPE-U(PU) |
| Buffer seal material | TPE-U(PU) |
| Material of cushioning boss | POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel |
| Material bearing | POM |
| Material collar nut | Galvanised steel |
| Material tie rod | High-alloy steel |
Often bought with
SNC-32 Swivel flange SNC-32
SNCB-32 Swivel flange SNCB-32
SNCL-32 Swivel flange SNCL-32
SNCS-32 Swivel flange SNCS-32
QS-G1/8-6 Push-in fitting QS-G1/8-6
QS-G1/8-6-I Push-in fitting QS-G1/8-6-I
QSL-G1/8-6 Push-in L-fitting QSL-G1/8-6
GRLA-1/8-QS-6-D One-way flow control valve GRLA-1/8-QS-6-D
Similar products
DSBG Standards-based cylinder DSBG 100 18 models
DSBG Standards-based cylinder DSBG 125 18 models
DSBG Standards-based cylinder DSBG 160 18 models
DSBG Standards-based cylinder DSBG 200 18 models
DSBG Standards-based cylinder DSBG 25 18 models
DSBG Standards-based cylinder DSBG 250 18 models
