Festo

DSL-40-25-270-CC-A-S2-KF-B — Swivel/linear unit

DSL-40-25-270-CC-A-S2-KF-B Swivel/linear unit

Part number DSL-40-25-270-CC-A-S2-KF-B · Order no. 556727

Overview

Swivel/linear unit DSL-40-25-270-CC-A-S2-KF-B. Piston diameter: 40 mm; Theoretical torque at 0.6 MPa (6 bar, 87 psi): 20 Nm; Swivel angle: 0…240°; Permissible mass moment of inertia: 0.004; Position detection: Via proximity switch

Technical data

Cushioning angle 16°
Rotation angle adjustment range 0 – 240°
Stroke 25 mm
Piston diameter 40 mm
Swivel angle 0 – 240°
Cushioning Shock absorber at both ends, Elastic cushioning rings/plates at both ends
Mounting position optional
Fine adjustment -3°
Mode of operation Double-acting
Design Vane
Position detection Via proximity switch
Variants Through piston rod
Protection against torque/guide Via ball bearings
Operating pressure 2.5 – 8 bar
Max. impact speed 0.5 mm/s
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) 0.7 Hz
Rotary angle backlash 0.05°
Repetition accuracy 0.1°
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 - Low corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Ambient temperature -10 – 60°C
Dynamic load torque 5.4 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 495 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 603 N
Theoretical torque at 0.6 MPa (6 bar, 87 psi) 20 Nm
Permissible mass moment of inertia 0.004
Product weight 5350 g
Basic weight for 0 mm stroke 5350 g
Additional weight per 10 mm stroke 175 g
Type of mounting Either:, Clamped in T-slot, Via male thread
Pneumatic connection G1/8
Material cover Wrought aluminium alloy, Anodised
Material seals TPE-U(PU)
Material housing Aluminium, Smooth anodised
Material piston rod Tempered steel

Often bought with

Similar products