Festo
HGPD-16-A-G2 — HGPD Parallel Gripper - 3 mm stroke per jaw
HGPD Parallel Gripper - 3 mm stroke per jaw, pneumatic
Part number HGPD-16-A-G2 · Order no. 1132938
Overview
Parallel gripper HGPD-16-A-G2. Stroke per gripper jaws: 3 mm; Position detection: Via proximity switch; Gripper force back-up: During closing
Technical data
| Size | 16 |
|---|---|
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0.1° |
| Max. gripper jaw backlash Sz | 0.02 mm |
| Rotationally symmetrical | 0.2 mm |
| Repetition accuracy, gripper | 0.03 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | optional |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripper force back-up | During closing |
| Design | Wedge-shaped drive, Force pilot operated motion sequence |
| Position detection | Via proximity switch |
| Operating pressure | 4 – 8 bar |
| Operating pressure of blocked air | 0 – 0.5 bar |
| Max. operating frequency of gripper | 3 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 30 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 15 ms |
| Max. mass per external gripper finger | 25 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Metals with more than 1% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils Metals with more than 1% of copper as an alloy component are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils |
| Degree of protection | IP65 |
| Ambient temperature | 5 – 60°C |
| Mass moment of inertia | 0.27 kg cm² |
| Max. torque at gripper Mx static | 8 Nm |
| Max. torque at gripper My static | 4 Nm |
| Max. torque at gripper Mz static | 3 Nm |
| Lubrication interval for guide components | 5 |
| Product weight | 117 g |
| Type of mounting | Either:, Via female thread and centring sleeve, Via through-hole and centring sleeve, Via through-hole and dowel pin, Via female thread and dowel pin |
| Pneumatic connection, blocked air | M3 |
| Pneumatic connection | M5 |
| Note on materials | RoHS-compliant |
| Material cover cap | High-alloy stainless steel |
| Material housing | Anodised aluminium |
| Material gripper jaws | Hardened steel |
Often bought with
SIEH Proximity Sensor - Inductive, PNP, 1 mm SIEH-3B-PS-K-L
SIEH Proximity Sensor - Inductive, PNP, 1 mm SIEH-3B-PS-S-L
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-0,3Q-M8D
SMT Proximity Sensor - Magneto-resistive, NPN, For C-slot SMT-10G-NS-24V-E-2,5Q-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10G-PS-24V-E-0,3Q-M8D
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10G-PS-24V-E-2,5Q-OE
PUN-H Plastic Tubing - 6 mm, Blue, Per Metre PUN-H-6X1-BL
Similar products
DHPC Parallel gripper DHPC 10 24 models
DHPC Parallel gripper DHPC 16 24 models
DHPC Parallel gripper DHPC 20 24 models
DHPC Parallel gripper DHPC 25 24 models
DHPC Parallel gripper DHPC 32 12 models
DHPC Parallel gripper DHPC 40 12 models
