Festo
HPV-10-10-A — Feed separator
HPV-10-10-A Feed separator
Part number HPV-10-10-A · Order no. 550908
Overview
Feed separator HPV-10-10-A. Mode of operation: Double-acting; Piston diameter: 10 mm; Stroke: 10 mm; Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 45 N
Technical data
| Stroke | 10 mm |
|---|---|
| Piston diameter | 10 mm |
| Max. replacement accuracy | 0.3 mm |
| Max. stem backlash Sx | 0.05 mm |
| Max. stem backlash Sz | 0.03 mm |
| Max. angular gripper jaw backlash ax | 0.12° |
| Max. angular gripper jaw backlash ay | 0.2° |
| Max. angular gripper jaw backlash az | 0.262° |
| Mounting of external fingers | Through-hole |
| Cushioning | No cushioning |
| Mounting position | optional |
| Mode of operation | Double-acting |
| Design | Twin piston, Piston rod, Locking mechanism, Non-rotating |
| Position detection | Via proximity switch |
| Half pulse | 26.5 ms |
| Protection against torque/guide | Square guide |
| Cycle time | 52.5 ms |
| Minimum product distance due to proximity switches | 60 mm |
| Proximity switch protrusion | 14 – 22 mm |
| Operating pressure | 3 – 8 bar |
| Advance time | 0.03 – 0.06 ms |
| Return-stroke time | 0.03 – 0.06 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Degree of protection | IP40 |
| Ambient temperature | 5 – 60°C |
| Max. tightening torque | 1.2 Nm for M3, 2.9 Nm for M4 |
| Max. force on finger Fz static | 75 N |
| Max. torque Mr at finger, static | 3 Nm |
| Max. torque at finger Mx static | 3 Nm |
| Max. torque at finger My static | 3 Nm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 35 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 45 N |
| Product weight | 135 g |
| Max. mass per external gripper finger | 56 g |
| alternative connections | M3 |
| Type of mounting | With through-hole for M3 screw and centring sleeve, With female thread M4 and centring sleeve |
| Pneumatic connection | M5 |
| Note on materials | RoHS-compliant |
| Material cover | High-alloy steel |
| Material seals | NBR |
| Material housing | Smooth-anodised wrought aluminium alloy |
| Material piston rod | High-alloy steel |
| Plunger material | High-alloy steel |
| Material gate valve | Case-hardened steel |
Often bought with
QSM-M5-4 Push-in fitting QSM-M5-4
QSML-M5-4 Push-in L-fitting QSML-M5-4
GRLA-M5-QS-4-D One-way flow control valve GRLA-M5-QS-4-D
SDBT-MSX Proximity Sensor - Magnetic Hall, switchable, For T-slot SDBT-MSX-1L-NU-E-0.3-N-M8
SDBT-MSX Proximity Sensor - Magnetic Hall, switchable, For T-slot SDBT-MSX-1L-PU-E-2.5-N-LE
SDBT-MSX Proximity Sensor - Magnetic Hall, switchable, For T-slot SDBT-MSX-1L-NU-E-2.5-N-LE
SDBT-MSX Proximity Sensor - Magnetic Hall, switchable, For T-slot SDBT-MSX-1L-PU-E-0.3-N-M8
SMT Proximity Sensor - Magneto-resistive, NPN, For T-slot SMT-8M-A-NS-24V-E-0,3-M8D
Similar products
DFSP Stopper cylinder DFSP 10 4 models
DFSP Stopper cylinder DFSP 15 6 models
DFSP Stopper cylinder DFSP 20 8 models
DFSP Stopper cylinder DFSP 25 6 models
DFSP Stopper cylinder DFSP 30 4 models
DFSP Stopper cylinder DFSP DF 14 models
