Festo
CMSH-S-V-SD-AL-C1M20-HA Positioner
Part number CMSH-S-V-SD-AL-C1M20-HA
Overview
Positioner CMSH-S-V-SD-AL-C1M20-HA Positioner CMSH-S-V-SD-AL-C1M20-HA Ambient temperature: -40…80; digital input, signal range: 4 - 20 mA with HART; Operating pressure: 1.4…8
Technical data
| Design | Digital, electropneumatic positioner |
|---|---|
| Mode of operation | Double-acting, Single-acting |
| Mounting position | optional |
| Functional principle of measuring system | Potentiometer |
| Sensing range | 0 – 115° |
| Display | LCD display, via software 90° rotatable |
| Setting options | Via display and keys |
| Cycle time | 20 ms |
| Nominal altitude of use | <= 2000 m NHN |
| Overvoltage category | II |
| Operating pressure | 0.14 – 0.8 MPa / 1.4 – 8 bar / 20.3 – 116 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible, Maximum particle size 40 µm |
| Air flow rate at Δp = 6 bar | 270 – 380 |
| Note on air flow rate | Depending on additional specific accessories |
| Pneumatic connection | With specific accessories |
| Reverse polarity protection | yes |
| Connection resistance | 3 – 80 kΩ |
| digital input, signal range | 4 - 20 mA with HART |
| Analogue inputs, input impedance | 480 ohm at 20 mA |
| Analog inputs, overload protection | <65 mA |
| Analogue inputs, electrical isolation | yes |
| Characteristic for inputs | 1x to IEC 61131-2, type 3 |
| Digital inputs, reverse polarity protection | yes |
| Digital inputs, electrical isolation | yes |
| Digital inputs, overload protection | 33 V |
| Electrical connection 1, function | Analogue input, Digital input, External path/angle sensor |
| Electrical connection 1, connection type | Terminal strip |
| Electrical connection 1, connector system | Spring-loaded terminal |
| Electrical connection 1, number of connections/cores | 7 |
| Cable fitting | 2x M20x1.5 |
| Max. cable length | 30 m for external position sensor, Shielded |
| Ambient temperature | -40 – 80°C |
| Note on ambient temperature | Display: -30 - 80°C |
| Storage temperature | -40 – 80°C |
| Climatic category | 1K5 to EN 60721 for storage, 4K3 to EN 60721 for operation |
| Degree of protection | IP66, IP67 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Pollution degree | 3 |
| Approval | RCM trademark, c UL us listed (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Explosion Protection Directive (ATEX), In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Material housing | Aluminium, powder-coated |
| Material screen | PC |
| Material shaft | High-alloy stainless steel |
| Material coupling | High-alloy stainless steel |
| Material screws | Galvanised steel |
| Material seals | EPDM, NBR, VMQ |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Note on materials | RoHS-compliant |
| Product weight | 2175 g |
Similar products
CMSX-P positioner 12 models
B-Fortis CC-Prime 7 models
B-Fortis CC-Slim 6 models
B-FORTIS-CC-DIO Remote EtherCAT I/O Module B-Fortis CC-DIO - 16 Inputs B-FORTIS-CC-DIO 16/16 P
B-NIMIS MC-I/O Buskoppler EtherCAT Bus Coupler - 3 A B-NIMIS MC-I/O Buskoppler 3A
B-NIMIS MC-I/O EtherCAT Digital I/O Module - 16 Inputs, 16 Outputs B-NIMIS MC-I/O DI16 DO16 1ms 0.5A
