Festo

DFPD-N-20-RP-90-RS30-F03 — Quarter turn actuator

DFPD-N-20-RP-90-RS30-F03 Quarter turn actuator

Part number DFPD-N-20-RP-90-RS30-F03 · Order no. 8066422

Overview

Quarter turn actuator DFPD-N-20-RP-90-RS30-F03. Pneumatic connection: 1/8 NPT; Torque at nominal operating pressure and 0° swivel angle: 7.4 Nm; Swivel angle: 90°; Flange hole pattern: F03; Shaft connection: T9

Technical data

Size of valve actuator 20
Flange hole pattern F03
Swivel angle 90°
End-position adjustment range at 0° -5 – 5°
End-position adjustment range at nominal swivel angle -5 – 5°
Shaft connection depth 10 mm
Fitting connection conforms to standard ISO 5211
Mounting position optional
Mode of operation Single-acting
Design Rack and pinion
Closing direction Closes to the right
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standard VDI/VDE 3845 size AA 1
Device type according to VDMA 66413 Safety device
Safety function The safety function consists of the actuator switching to the specified safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved through the spring force of the spring assembly.
Safety Integrity Level (SIL) To SIL 2 Low Demand mode, Up to SIL 3 in a redundant architecture, Up to SIL 1 high demand mode
Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in SRP/CS up to SIL 2 (Low Demand), Product can be used in SRP/CS up to SIL 1 (High Demand), Up to SIL 3 in a redundant architecture
Burst pressure 24 bar
Operating pressure 0.2 – 0.8 MPa / 2 – 8 bar / 29 – 116 psi
Nominal operating pressure 0.3 MPa / 3 bar / 43.5 psi
Maritime classification See certificate
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity) To UK EX instructions
Explosion protection certification outside the EU EPL Db (GB), EPL Gb (GB)
Certificate issuing authority DNV TAP00001CE, German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023
ATEX category gas II 2G
ATEX category dust II 2D
Explosion ignition protection type for gas Ex h IIC T4 Gb X
Explosion ignition protection type for dust Ex h IIIC T105°C Db X
Explosion ambient temperature -20 °C <= Ta <= +80 °C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Dew point at least 10 °C below the ambient temperature and temperature of the medium, Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformity VDMA24364-B1/B2-L
Storage temperature -20 – 60°C
Ambient temperature -20 – 80°C
Torque at nominal operating pressure and 0° swivel angle 7.4 Nm
Torque at nominal operating pressure and 90° swivel angle 3.8 Nm
Note on torque The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Spring return torque at 0° swivel angle 3.6 Nm
Spring return torque at 90° swivel angle 7.1 Nm
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 0.8
Product weight 1371 g
Shaft connection T9
Pneumatic connection 1/8 NPT
Note on materials RoHS-compliant
Material sub-base Anodised wrought aluminium alloy
Material cover Coated die-cast aluminium
Material seals NBR
Material spring Spring steel
Material housing Anodised aluminium
Material piston Die-cast aluminium
Material bearing POM
Material cam High-alloy stainless steel
Material screws High-alloy stainless steel
Material shaft Nickel-plated steel

Often bought with

Similar products