Festo
DAPS-0015-090-RS1-F03-CR — Quarter turn actuator
DAPS-0015-090-RS1-F03-CR Quarter turn actuator
Part number DAPS-0015-090-RS1-F03-CR · Order no. 552875
Overview
Quarter turn actuator DAPS-0015-090-RS1-F03-CR. Pneumatic connection: G1/8; Swivel angle: 90°; Flange hole pattern: F03; Shaft connection: T9
Technical data
| Size of valve actuator | 15 |
|---|---|
| Flange hole pattern | F03 |
| Swivel angle | 90° |
| Shaft connection depth | 10.2 mm |
| Cushioning | No cushioning |
| Mounting position | optional |
| Mode of operation | Single-acting |
| Design | Scotch yoke system |
| Position detection | Without |
| Closing direction | Closes to the right |
| Safety Integrity Level (SIL) | Up to SIL 2 High Demand mode, To SIL 2 Low Demand mode |
| Supply pressure for spring strength | 0.28 MPa / 2.8 bar |
| Operating pressure | 0.28 – 0.84 MPa / 2.8 – 8.4 bar |
| Nominal operating pressure | 0.56 MPa / 5.6 bar |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Certificate issuing authority | German Technical Control Board North (TÜV Nord) 212170801 |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20 – 80°C |
| Spring return torque at 0° swivel angle | 5 Nm |
| Spring return torque at 50° swivel angle | 3.7 Nm |
| Spring return torque at 90° swivel angle | 7.5 Nm |
| Spring strength | 1 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 0.6 |
| Product weight | 1600 g |
| Shaft connection | T9 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Material cover | High-alloy stainless steel |
| Material number cover | 1.4408 |
| Material seals | FPM, NBR, PUR |
| Material housing | High-alloy stainless steel |
| Material number housing | 1.4408 |
| Material screws | High-alloy stainless steel |
| Material shaft | High-alloy stainless steel |
| Material number shaft | 1.4301 |
Often bought with
QS-G1/8-8 Push-in fitting QS-G1/8-8
QS-G1/8-8-I Push-in fitting QS-G1/8-8-I
QSL-G1/8-8 Push-in L-fitting QSL-G1/8-8
PUN-H Plastic Tubing - 8 mm, Black PUN-H-8X1,25-SW
PUN-H Plastic Tubing - 8 mm, Blue, Per Metre PUN-H-8X1,25-BL
Similar products
DAPS Quarter turn actuator DAPS F04 25 models
DAPS Quarter turn actuator DAPS F05 38 models
DAPS Quarter turn actuator DAPS F07 56 models
DAPS Quarter turn actuator DAPS F10 48 models
DAPS Quarter turn actuator DAPS F12 33 models
DAPS Quarter turn actuator DAPS F14 47 models
