Festo

DHWC-6-A — DHWC Angle Gripper - 30° opening angle

DHWC Angle Gripper - 30° opening angle, pneumatic

Part number DHWC-6-A · Order no. 8125286

Overview

Angle gripper DHWC-6-A. Size: 6; Operating pressure: 0.25…0.8; Mode of operation: Double-acting; Pneumatic connection: M3

Technical data

Size 6
Max. replacement accuracy ≤ 0.2 mm
Max. opening angle 30°
Repetition accuracy, gripper ≤ 0.1 mm
Number of gripper jaws 2
Drive system Pneumatic
Mounting position Any
Mode of operation Double-acting
Gripper function Bracket
Gripper force back-up None
Design Force pilot operated motion sequence
Position detection Via proximity switch
Operating pressure 0.25 MPa ... 0.8 MPa / 2.5 bar ... 8 bar / 36.25 psi ... 116 psi
Max. operating frequency of gripper ≤ 3 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 4 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 7 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 0 - No corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Suitability for the production of Li-ion batteries Suitable for battery production with reduced Cu/Zn/Ni values (F1a)
Ambient temperature -10 °C ... 60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening 7.3 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) 5.4 Ncm
Mass moment of inertia 0.009 kgcm²
Max. force on gripper jaw Fz static 18 N
Max. torque at gripper Mx static 0.3 Nm
Max. torque at gripper My static 0.3 Nm
Max. torque at gripper Mz static 0.3 Nm
Product weight 22 g
Type of mounting Either:, Direct mounting via through-hole, Direct mounting via thread
Pneumatic connection M3
Note on materials RoHS compliant
Material cover cap Wrought aluminium alloy, anodised
Material housing Anodised wrought aluminium alloy
Material gripper jaws High-alloy steel

Similar products