Festo
DHWS-10-A — DHWS Angle Gripper - 40° opening angle
Part number DHWS-10-A · Order no. 1310177
Overview
Angle gripper DHWS-10-A. Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi): 30 N cm; Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening: 43 N cm; Position detection: Via Hall sensor
Technical data
| Size | 10 |
|---|---|
| Max. replacement accuracy | 0.2 mm |
| Max. opening angle | 40° |
| Rotationally symmetrical | 0.2 mm |
| Repetition accuracy, gripper | 0.04 mm |
| Number of gripper jaws | 2 |
| Mounting position | optional |
| Mode of operation | Double-acting |
| Gripper function | Angle |
| Design | Lever |
| Position detection | Via Hall sensor |
| Operating pressure | 2 – 8 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 10 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 22 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Metals with more than 1% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils Metals with more than 1% of copper as an alloy component are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils |
| Ambient temperature | 5 – 60°C |
| Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening | 43 N cm |
| Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) | 30 N cm |
| Mass moment of inertia | 0.03 kg cm² |
| Max. force on gripper jaw Fz static | 25 N |
| Max. torque at gripper Mx static | 0.6 Nm |
| Max. torque at gripper My static | 0.6 Nm |
| Max. torque at gripper Mz static | 0.6 Nm |
| Product weight | 40 g |
| Type of mounting | Either:, Via female thread and centring sleeve, Via through-hole and centring sleeve |
| Pneumatic connection | M3 |
| Note on materials | RoHS-compliant |
| Material cover cap | PA |
| Material housing | Wrought aluminium alloy, Hard anodised |
| Material gripper jaws | High-alloy steel |
Similar products
DHWC Angle gripper DHWC 11 models
HGWM Angle gripper HGWM 12 models
