Festo

DHDS-16-A-NC — DHDS Three-Point Gripper - 2

DHDS Three-Point Gripper - 2.5 mm stroke per jaw, NC

Part number DHDS-16-A-NC · Order no. 1259492

Overview

Three-point gripper DHDS-16-A-NC. Stroke per gripper jaws: 2.5 mm; Position detection: Via Hall sensor; Gripper force back-up: During closing

Technical data

Size 16
Stroke per gripper jaws 2.5 mm
Max. replacement accuracy 0.2 mm
Max. angular gripper jaw backlash ax, ay 0.5°
Max. gripper jaw backlash Sz 0.02 mm
Rotationally symmetrical 0.2 mm
Repetition accuracy, gripper 0.04 mm
Number of gripper jaws 3
Mounting position optional
Mode of operation Double-acting
Gripper function 3-point
Gripper force back-up During closing
Design Lever, Force pilot operated motion sequence
Position detection Via Hall sensor
Operating pressure 4 – 8 bar
Max. operating frequency of gripper 4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 31 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 34 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 - Low corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils Metals with more than 1% of copper as an alloy component are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical plug connectors and coils
Ambient temperature 5 – 60°C
Mass moment of inertia 0.139 kg cm²
Max. force on gripper jaw Fz static 50 N
Max. torque at gripper Mx static 2 Nm
Max. torque at gripper My static 2 Nm
Max. torque at gripper Mz static 2 Nm
Lubrication interval for guide components 10
Max. mass per external gripper finger 50 g
Product weight 99 g
Type of mounting Via female thread and dowel pin
Pneumatic connection M3
Note on materials RoHS-compliant
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy stainless steel

Similar products