Festo
HGDT-25-A-G1 — HGDT Three-Point Gripper - 3 mm stroke per jaw
Part number HGDT-25-A-G1 · Order no. 540860
Overview
Three-point gripper HGDT-25-A-G1. Stroke per gripper jaws: 3 mm; Position detection: Via proximity switch; Gripper force back-up: During opening
Technical data
| Size | 25 |
|---|---|
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0.1° |
| Max. gripper jaw backlash Sz | 0.05 mm |
| Rotationally symmetrical | 0.2 mm |
| Repetition accuracy, gripper | 0.03 mm |
| Number of gripper jaws | 3 |
| Mounting position | optional |
| Mode of operation | Double-acting |
| Gripper function | 3-point |
| Gripper force back-up | During opening |
| Design | Wedge-shaped drive, Force pilot operated motion sequence |
| Position detection | Via proximity switch |
| Operating pressure | 4 – 8 bar |
| Operating pressure of blocked air | 0 – 0.5 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 27 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 33 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | 5 – 60°C |
| Mass moment of inertia | 0.5 kg cm² |
| Max. force on gripper jaw Fz static | 350 N |
| Max. torque at gripper Mx static | 7 Nm |
| Max. torque at gripper My static | 10 Nm |
| Max. torque at gripper Mz static | 5 Nm |
| Lubrication interval for guide components | 5 |
| Max. mass per external gripper finger | 10 g |
| Product weight | 203 g |
| Type of mounting | Either:, Via through-hole and dowel pin, Via female thread and dowel pin |
| Pneumatic connection, blocked air | M5 |
| Pneumatic connection | M5 |
| Material cover cap | High-alloy stainless steel |
| Material housing | Wrought aluminium alloy, Coated with COMPCOTE |
| Material gripper jaws | Hardened steel |
Often bought with
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-2,5-L-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-2,5-Q-OE
SMT Proximity Sensor - Magneto-resistive, PNP, For C-slot SMT-10M-PS-24V-E-0,3-Q-M8D
PUN-H Plastic Tubing - 6 mm, Blue, Per Metre PUN-H-6X1-BL
Similar products
DHDS Three-point gripper DHDS 6 models
HGDD Three-point gripper HGDD 15 models
