Festo

HGDD Three-Point Gripper - 4 mm stroke per jaw

Part number HGDD-35-A-G1

Overview

Three-point gripper HGDD-35-A-G1. Stroke per gripper jaws: 4 mm; Position detection: Via proximity switch; Gripper force back-up: During opening

Technical data

Size 35
Stroke per gripper jaws 4 mm
Max. replacement accuracy 0.2 mm
Max. angular gripper jaw backlash ax, ay 0.1°
Max. gripper jaw backlash Sz 0.05 mm
Rotationally symmetrical 0.2 mm
Repetition accuracy, gripper 0.03 mm
Number of gripper jaws 3
Mounting position optional
Mode of operation Double-acting
Gripper function 3-point
Gripper force back-up During opening
Design Wedge-shaped drive, Force pilot operated motion sequence
Position detection Via proximity switch
Symbol 995947
Operating pressure 4 – 8 bar
Operating pressure of blocked air 0 – 0.5 bar
Max. operating frequency of gripper 4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 38 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 85 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B2-L
Degree of protection IP65
Ambient temperature 5 – 60°C
Mass moment of inertia 1.37
Max. force on gripper jaw Fz static 300 N
Max. torque at gripper Mx static 12 Nm
Max. torque at gripper My static 8 Nm
Max. torque at gripper Mz static 8 Nm
Lubrication interval for guide components 5
Max. mass per external gripper finger 57 g
Product weight 370 g
Type of mounting Either:, Via through-hole and dowel pin, Via female thread and dowel pin
Pneumatic connection, blocked air M3
Pneumatic connection M5
Note on materials RoHS-compliant
Material cover cap High-alloy stainless steel
Material housing Smooth-anodised wrought aluminium alloy
Material gripper jaws Hardened steel

Often bought with