Festo
CPX-E Digital Input Module - 16-Inputs
Part number CPX-E-16DI
Overview
Digital input module; Series: Individual component for automation system CPX-E; Output ducts: None; Input channels: 16 input channels; Switching input/output: PNP
Technical data
| Dimensions (W x L x H) | 18.9 x 76.6 x 124.3 mm |
|---|---|
| Grid dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Product weight | 102 g |
| Mounting position | Vertical, Horizontal |
| Ambient temperature | -5 – 50°C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 – 70°C |
| Relative air humidity | 95 %, Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Max. cable length | 30 m inputs |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM trademark, c UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA |
| Diagnostics via LED | Errors per module, Status per channel |
| Diagnostics via bus | Short circuit/overload in sensor supply |
| Max. address volume, inputs | 2 |
| Module parameters | Short circuit diagnostics for sensor supply, Input debounce time, Signal extension time, Behaviour after short circuit/overload |
| Channel parameters | Signal extension |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25% |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 15 mA |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 8x terminal strip |
| Electrical connection input, connector system | Spring-loaded terminal |
| Electrical connection input, number of connections/cores | 6 |
| Electrical connection input, connection pattern | 995843 |
| Electrical connection for input, conductor cross section | 0.2 – 1.5 |
| Electrical connection for input, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Number of inputs | 16 |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching level | Signal 0: <= 5 V, Signal 1: >= 11 V |
| Switching logic for inputs | PNP (positive switching), 2-wire sensors to IEC 61131-2, 3-wire sensors to IEC 61131-2 |
| Input debounce time | 0.1 ms, 3 ms, 10 ms, 20 ms |
| Max. residual current of inputs per module | 1.8 A |
| Isolation channel - channel | no |
| Isolation channel - internal bus | no |
| Fuse protection (short circuit) | Internal electronic fuse per module |
Similar products
Box Remote I/O Module B32-EC-11-26
CPX-AP Bus Interface - EtherCAT CPX-AP-I-EC-M12
CPX-AP Bus Interface - EtherNet/IP CPX-AP-I-EP-M12
CPX-AP Digital I/O Module - 4-Inputs/4-Outputs, M8 3-Pin CPX-AP-I-4DI4DO-M8-3P
CPX-AP IO-Link Master Module - 4-Ports CPX-AP-I-4IOL-M12
CPX-AP Digital Input Module - 8-Inputs, M8 3-Pin CPX-AP-I-8DI-M8-3P
