Festo
CPX-E Digital Output Module - 8-Outputs
Part number CPX-E-8DO
Overview
Digital output module; Series: Individual component for automation system CPX-E; Output ducts: 8 output channels; Input channels: None; Switching input/output: PNP
Technical data
| Dimensions (W x L x H) | 18.9 x 76.6 x 124.3 mm |
|---|---|
| Grid dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Product weight | 93 g |
| Mounting position | Vertical, Horizontal |
| Ambient temperature | -5 – 50°C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 – 70°C |
| Relative air humidity | 95 %, Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| Max. cable length | 30 m outputs |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM trademark, c UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA |
| Diagnostics via LED | Errors per channel, Errors per module, Status per channel |
| Diagnostics via bus | Module error, Short circuit/overload at output, Undervoltage in load supply |
| Max. address volume, outputs | 1 |
| Number of outputs | 8 |
| Module parameters | Short circuit diagnostics at output, Diagnostics for undervoltage in load supply, Behaviour after short circuit/overload |
| Channel parameters | Force channel x |
| Power supply, connection type | Terminal strip |
| power supply, connection system | Spring-loaded terminal |
| Power supply, connection pattern | 995847 |
| Power supply, number of pins/wires | 4 |
| Nominal operating voltage DC of load | 24 V |
| Permissible voltage fluctuation of load | ± 25 % |
| Power supply, conductor diameter | 0.2 – 1.5 |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Intrinsic current consumption at nominal operating voltage load | Typically 34 mA |
| Reverse polarity protection | 24 V load against 0 V load |
| Electrical connection output, function | Digital output |
| Electrical connection output, connection type | 4x terminal strip |
| Electrical connection output, connector system | Spring-loaded terminal |
| Electrical connection output, number of connections/cores | 4 |
| Electrical connection output, connection pattern | 995846 |
| Electrical connection for output, conductor cross section | 0.2 – 1.5 |
| Electrical connection for output, note on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Characteristic for outputs | According to IEC 61131-2, type 0.5 |
| Switching logic for outputs | PNP (positive switching) |
| Behaviour after end of overload of the outputs | No automatic return (default), Parameterisable (module by module) |
| Max. residual current outputs per module | 4 A |
| Isolation channel - channel | no |
| Isolation channel - internal bus | yes |
| Fuse protection (short circuit) | Internal electronic fuse per channel |
Similar products
Box Remote I/O Module B32-EC-11-26
CPX-AP Bus Interface - EtherCAT CPX-AP-I-EC-M12
CPX-AP Bus Interface - EtherNet/IP CPX-AP-I-EP-M12
CPX-AP Digital I/O Module - 4-Inputs/4-Outputs, M8 3-Pin CPX-AP-I-4DI4DO-M8-3P
CPX-AP IO-Link Master Module - 4-Ports CPX-AP-I-4IOL-M12
CPX-AP Digital Input Module - 8-Inputs, M8 3-Pin CPX-AP-I-8DI-M8-3P
